Bless This Home and All Who Enter Vinyl Wall Decal Sticker Quote Home Decor

Description

start_elivehelp_btncode
end_elivehelp_btncode
What you will receive:
"
Bless This Home and All who Enter
"
Vinyl Decal in your choice of one color
Size measures approximately 11 inches high x 13.5 inches wide.
16 x 20
or 21 x 26
Custom sizes are available. Just send me a message.
Size in image may be larger to show detail.
Please choose from the color chart pictured above.
Due to monitor settings, colors may vary slightly.
Vinyl will come in matte finish.
One Fun Wall vinyl decals are made in the
U.S.A from
high
quality removable vinyl.
They are easy to remove and will not
damage the surface in any
way. We provide
excellent customer
service and
fast shipping.
Free shipping within the U.S. USPS First Class Shipping
USPS First Class International Shipping -
cost varies by location
How to apply your decal:
Wash wall with soap and water. Let dry for 24 hrs before applying decal.
Application Instructions Remove decal from box & lay image side face down on a table.
Keep flattened overnight. It is much easier to work with when the decal is flat.
Peel back the tape on each corner. Rub over the back of the decal with a hard but gentle edge
like a large tongue depressor, plastic card, plastic scraper or plastic spatula.
This helps the vinyl stick to the application tape. Starting from the corner, slowly peel off
the backing paper leaving your decal on the application tape. If some of the vinyl does not
want to stick to the tape, rub the area again until the vinyl sticks. Once your decal is on the tape,
you can adhere it to your wall. Use 2 people for large decals. Place one edge of the decal
onto the wall. From that edge, use your hand to smooth down the decal. Use your plastic tool
and rub over the decal. Starting at one corner, slowly peel off the application tape.
If your decal does not stick to the wall, rub the area again until it sticks. You're done! Enjoy.
Removal Instructions:
Vinyl is easy to remove. Just use a hair blow dryer to loosen the vinyl
from the wall. Peel the decal away. If necessary, use a mild soap to remove any existing residue.
Vinyl lettering can be applied to most non-pourous smooth or semi-smooth surfaces.
You may find some difficulty applying vinyl lettering to porous or chalk-like surfaces, such as stone,
as well as painted surfaces in which a flat paint was used, or heavily textured walls.
Vinyl cannot be re-used.
Thank you for looking!